Skip navigation sign in. Chrisfix recommended for you.
Grab your tools.
How to replace a clutch cable.
When the lever is engaged the cable and spring work to pull the clutch plate away from the flywheel allowing the riding mower to move forward.
So i got out and checked and a rock grabbed my clutch cable and ripped it in half.
The inner cable passes through the clutch lever and the nuts fit on the end of the cable to secure it.
Remove the fuel tank cap.
Luckily i had a vice grip and some zip ties and i managed to use that to get home.
Using your needle nose plyers you will need to remove the cotter pin holding a slotted anchor pin in the cable.
Steps on how to remove and replace the clutch cable on a 2003 kia rio.
The cable and spring can rust or corrode and require replacement.
Cam replacement on a harley davidson twin cam.
How to replace a clutch cable.
Depress the release tabs and pull the zone control cable out of the drive cable clip.
Hold the adjuster nut with one spanner and undo the locknut with another.
Its a simple operation to replace the clutch cable.
How to replace a clutch in your car or truck full diy guide duration.
Undo at the lever end first to get some slack in the cable look under the generator side to see where the cable is attached and remove any dirt etc pull back outer cable out of hole and then downwards out of the longish groove.
Remove the cotter pin.
Locate the clutch pedal in the driver side of the vehicles cab.
How to video on changing the clutch cable on a 1972 vw beelte.
Remove both nuts completely from the end of the cable and put them somewhere safe as the new cable may not come with any.
On lawn tractors a lever near the steering wheel connects to the clutch cable and spring.
Fixing broken clutch cable on electra glide.
It only took me 30 minutes.
Cut the cable ties that secure the cables to the mower handle.
Fixing broken clutch cable on electra glide.
No comments:
Post a Comment