Put the washers over the flange bolts and hand tighten them using a wrench. Remove the broken area from the flange to be repaired using a hacksaw.
Put on the rubber gloves and using the scraper remove the remnants of the old wax from the wax ring and the old toilet bolts.
How to repair toilet flange bolts.
Rest the toilet bowl on its side place it on a towel or cloth to protect the floor.
Finally fix that stubborn leaky faucet with these tips.
Lastly remove toilet add the new toilet bolts then replace the toilet.
Set the nuts aside to reattach the toilet when the.
After replacing the wax ring secure the new toilet flange in place with.
There are two options this step.
Place a plastic cap holder and a metal washer over each bolt.
Place the wax ring in position on the flange before lowering the bowl into place.
Hook the heads of the closet bolts to the underside of the repair plate repair ring or push in replacement and center them in the tracks.
Install the toilet bowl over the flange and bolts letting it drop exactly in place.
Once its on the floor push down on the bowl to compress the wax ring.
Hold the toilet upright over the flange and guide the bolts through the holes in the base as you lower it in place.
Remove old toilet and add new toilet bolts to the toilet flange.
Place a new wax ring on the flange opening replace the toilet and bolt it to the flange.
Use half turns only to ensure that you do not over tighten them and crack the porcelain of your toilet.
Screw it down with the bolts that you removed from the old ring.
With your toilet bolt replacement nearly complete in your.
Screw on the nut and tighten it as much as you can by hand.
Discard in a trash bag.
Unfasten the two nuts on bolts that hold the toilet to the flange and floor.
Use the adjustable wrench if the nuts dont loosen easily by hand.
No comments:
Post a Comment