Turn off the water supply to the faucet. Locate the set screw under the handle or cap at the front of the unit.
Lay out all the tools and materials needed.
How to replace bathtub faucet handles single.
Turn off your water.
Step 2 prepare to remove shower faucet.
Remove the access panel on the other side of the tub wall to.
Loosen the screw holding the faucet handle and remove the handle.
Use a screwdriver to remove the retainer clip at the top of the cartridge housing.
Remove the screw and pull.
Loosen the bonnet nut holding the faucet stem in the housing.
This is an easy to follow in depth step by step instructional tutorial on how to fix the leak quick and easy.
Using a small flathead.
How to replace a single lever shower faucet step 1 turn off the water source.
A single handle bath shower can be removed with the proper tools and a little bit of know how.
Take off the escutcheon plate around the faucet by removing the screws holding it in place.
Locate the water heater and tighten the valves to cut off.
Remove all the bathtub trim which includes the handles escutcheon plates the plates around.
Use a pair of pliers to grasp the protruding tip of the valve stem and pull it straight out of the faucet housing.
How to replace bathtub faucets with a single handle turn off the water to the bathtub.
How to replace or install valves by faucet type.
Step 3 remove the faucet handle.
If this is a single handle faucet turn off both supplies.
Look beneath the sink for a valve close to the wall on the same side as the handle you are replacing.
Remove a single handle bath shower with help from a longtime p.
This is a delta single handle model faucet.
Be sure not to lose this piece.
When you locate them twist the water supply valve or valves tightly to the right.
If you cannot find a dedicated shutoff valve.
No comments:
Post a Comment