Spray the socket bolt if the arm is not held on by a release lever with some spray lubricant which may help in getting the bolt off. Makes it easier for me.
Remove the nut and grab the wiper arm at the splice part and pushpull with force a few timesit should release off the studshort of thatat workwe use a battery terminal pullerloosen the nut ot the top of the threads and install the puller around the arm at the post.
How to remove windshield wiper arm chevy silverado.
The upward shaft from the motor that the arms slide onto has grooves like a gear.
Lift the wiper arm and near the pivot point there is a little flat bar that sticks out along the arm itself.
With the cover removed you can remove the wiper nut.
1a auto shows you how to repair install fix change or replace a damaged bent or failing windshield wiper arm.
Its about a quarter inch long.
Its easier to get to if you remove the whole arm.
It is an interference fit so the best way to remove it is with a battery terminal puller.
Once that is removed then you can remove the arm.
You do have to rock the short part of the wiper arm that attaches to the shaft back and forth to loosen it while holding the longer part of the arm that the wiper blade attaches to upward away from the windshield.
The engineers made it simple to remove.
Pull the wiper arm away from the window noting the position of the wiper.
If you cannot get.
Remove and replace wiper blade assebly 89 chevy silverado there is a keeper on the inside of the arm.
Remove the socket bolt with a socket wrench and remove the arm from its socket.
All you need is an 18 drill bit punch or possibly a 16 nail.
Hellocustomer in order to remove the wiper arm you must remove the nut cover at the end of the wiper arm.
How to remove the windshield wiper arms on a chevy.
The right way to remove this style of gm wiper arms.
This video is applicable to the chevy silverado and gmc sierra model years 99.
Pull that out alittle and slide the arm off the peg.
No comments:
Post a Comment