When youre a do it your selfer and a blogger you have to look on the bright side. That doesnt mean you have to put up with a loud and obnoxious fan even in older homes with outdated mechanisms.
They say nothing is certain but death and taxes but id like to add a third.
/bathroom-58eae9255f9b58ef7e66758c.jpg)
How to replace a bathroom exhaust fan in an apartment.
Seeing as how my brothers are here i decided.
So the bathroom fan in my apartment sounds like the belch of satan every time i turn it on.
In one week alone three things broke down on us that had to be repaired.
Water is everywhere in a bathroom.
Splashing on the floor beading up on the walls dripping down the mirror.
Disconnect the wiring and remove the fan motor from the housing.
Remove the existing fan leaving the old duct work and wiring.
Be careful not to cut through any ducting or wiring when doing this.
Therefore ive been wanting to get someone in to fix it.
Bathroom exhaust fans do the thankless task of removing unwanted odors.
Remove the cover on the bathroom vent fan.
Measure the ceiling opening and determine if it is large enough to accommodate your new fan.
If not you must cut around the current opening in order to increase the size of the opening.
Id start by asking the building staff if the building has a common interior ventilation shaft where the fan can connect to says ayuso.
Bath exhaust fans are about keeping your house in top shape by moving water out of your bathroom.
Begin by removing the screws on the cover of the old fan so that you can access the wiring.
Disconnect the vent pipe from the fan housing.
If needed adjust the existing hole in the ceiling to fit the new vent fan housing.
Then ensure the power is switched off by using a voltage detector and disconnect the wiring to the fan.
But if you want to install a more typical bathroom exhaust fan that will require a ducted connection to the buildings exterior which will require some communication with your building.
Heres a few things to look for while looking to replace fans with a few inexpensive models for a quick and easy weekend afternoon swapthere are a few.
Remove the vent fan housing.
And there is one other invisible place where you will find water in the bathroom.
How to replace a bathroom exhaust fan.
To replace a bathroom fan all you need to do is remove the old fan and install a new one in its place using the same wiring and connections.
Attach the vent fan housing to the ceiling joists.
No comments:
Post a Comment