How To Replace A Toilet Flapper

Monday, January 1, 2018

How To Replace A Toilet Flapper

Turn off the water. When a toilet continues to run after you flush it.

How Fix A Slow Toilet Leak A Concord Carpenter

Toilet Flapper Replacement Amazon Com

Remove the lid from the tank and flush the toilet to remove as much water.

How to replace a toilet flapper.

This allows the tank to fill again for the next flush.
Its time to remove the old flapper.
Remove the old flapper valve.

Now lets explain each of the steps more elaborately.
Replace the tank on the bowl and secure it in place with the existing bolts.
Get a towel and sponge and wipe up the rest.

Diagnosing a flapper problem.
Refer to step 4 again.
Method 2 replacing your toilet flapper valve 1.

Loosen the nuts located on the base.
Remove the tank lid and set it aside in a safe area.
Once you have removed it its time to replace it.

Turn off the water to the toilet by closing the shutoff valve located.
Drain as much water from the tank as you can.
Remove the lid to the tank and locate the flapper chain.

Take out any water left in the tank.
Next install the new fill valve making sure the new one matches the same model as the old valve.
Now refill the toilet bowl.

A standard gravity flush toilet is remarkably simple in design.
Once you have a compatible flapper ready to install be sure to first shut off the water supply valve to the toilet tank.
Make sure the incoming water supply to the toilet tank is shut off.

The valve is secured with a lock nut under the tank and a flexible tube connects the tanks overflow pipe.
Press and hold the tank lever down until all water exits the tank.
You need to turn off the water in the toilet before replacing the flapper.

Immediately after the first flush the flapper swings back down to its position over the drain hole to prevent more water from going through.
Detach the chain that connects the flapper to the tank lever and remove the flapper.
Disconnect the bad flapper valve.

Remove the water supply hose or tube.
How to replace a toilet flapper anatomy of a toilet.
How to replace a toilet flapper removing the old flapper turn off the water to your toilet.

This breaks the seal and water runs down into the toilet bowl.