You will then need to get a good look at. A handle puller may be required if.
The plastic mounting nuts can sometimes be unscrewed by hand but metal mounting nuts will require the use of a wrench or slip joint pliers.
How to replace bathtub faucet in mobile home.
Make sure you dont make it too tight you could crack the tub.
The faucet should pull right out.
Drill a pilot hole through the lip of the tub and secure it to the wall with a screw.
To remove your old faucet you will have to access the wall behind the faucet.
To install the faucet apply a bead of plumbers putty around the back edge of the faucet.
The waterlines are simply screwed onto the faucet.
You will now need to clean behind the old faucet.
Brought to you by mobile home parts r us randy the mobile home guy.
Remove the locking nut that holds the stem in using.
Learn how to replace a bathtub faucet in a mobile home.
Shut off the water supply.
Next remove the old faucet.
To remove the old faucet first unscrew the water lines and second unscrew the mounting nuts.
Unscrew the ends then unscrew the nuts from the left and right nipple.
Follow these simple steps and youll be able to replace your own faucet.
Use a screwdriver to take off the handle.
Insert the faucet through the three holes in the tub surround.
Installing the new tub surround a mobile home bathtub surround installs with glue and sometimes with plastic rivets too.
To remove the handle pry off the small cover that hides the handle screw.
Shut off the water before you begin.
No comments:
Post a Comment