Proper tire pressure for the jeep liberty is 33 psi for front and rear tires. In this video i will show you how to reprogram a new sensor to any car or trucki will show you how to clone the old sensor so the tpms recognizes the sensor as if it was the original one from the.
Lift the jeep with a jack and inspect the problem tire carefully.
How to replace tire pressure sensor on jeep wrangler.
The tpms is useful for spotting leaks because it will usually tell you which tire has low pressure.
You will need to add air or release it from each tire to get to the recommended setting.
If you find any tears or holes in the rubber you can either patch it or replace the tire completely.
Now for many replacing stock tires with something larger is one of the more important modifications after purchasing a jeep.
When checking and adjusting tire inflation pressures the correct inflation pressure for everyday use is always the one found on the vehicles tire information placard label.
Replace the valve stem caps and drive the vehicle for a few blocks.
If its lower than when you last checked then you may have a leak on your hand.
I really loved reading your blog. It was very well authored and easy to understand. Unlike additional blogs I have read which are really not that good. I also found your posts very interesting. In fact after reading, I had to go show it to my friend and he enjoyed it as well!
ReplyDeleteautoparts near me