Once the tank is empty disconnect the lift chain from the flush lever. If you have a toilet thats constantly running the culprit is more than likely a leaky flapper valve.
Install the new gasket and valve.
How to replace a toilet flapper valve.
How to replace a toilet flapper installing the new flapper purchase a new flush valve seal.
Drain the toilet tank by flushing the toilet.
This is jeff from home repair tutor and today i.
Turn off the water to the toilet by closing the shutoff valve located on the water supply line leading to the toilet.
Toilet flapper valves are very easy to replace and only cost a few dollars.
Category howto style.
Adjust the chain length.
Remove the lid from the tank and flush the toilet to remove as much water.
Turn the handle on the valve clockwise until it stops.
Disconnect the flapper chain from the flush lever.
Wipe the seat of the flush valve with a cloth or paper towel.
If your toilet keeps running or you have to jiggle the handle to get it to stop chances are good that you need to replace the toilet flapper valve.
Once you have a compatible flapper ready to install be sure to first shut off the water supply valve to the toilet tank.
Remove both sides of the flapper from the pegs on the overflow tube and remove the old flapper.
Connect the new flapper to the flush valve.
Important tips on how to replace the toilet bowl flapper including the adjustment of the float and how to properly drain the water without much hassle.
How to replace a toilet fill valve and flapper step 1.
Test out the new flapper.
Flush the toilet to empty the water from the tank.
Begin the flapper valve replacement by removing the tanks lid turning off the water supply valve and flushing the toilet.
Over time they may become cracked or warped which can allow water to leak out.
Remove the lid on the toilet tank.
No comments:
Post a Comment