The next step is to gain access to. If you are changing anything about the design of the transom.
How to rebuild the transom on a fiberglass boat take plenty of pictures first.
How to repair fiberglass boat transom.
Glassing it onto the.
Step 6 add fiberglass.
Part 1 of a short series on how to replace a rotten transom on an older boat specifically a boston whaler 25.
Working from one end of the hull to the other apply the bond coat over the fiberglass cloth.
Install the biggest patch first with each layer being progressively smaller to fill the 121 bevel.
Fiberglass transom repair step 1.
Step 7 sand the edges.
Click here to see the boat with its new transom repair on the.
Vacuum up the dust and wipe down the fiberglass with acetone.
This is fiberglass boat improve construction.
Apply another coat of resin.
For example repairing an outboard on your boat transom can.
My plywood was already sanded on the flat surface.
Usually a problem with the boat transom does mean youre in for either a costly or a labor intensive repairor both.
For additional information on laminating a large new fiberglass skin see section 43 of fiberglass boat repair maintenance free download.
Here is the number one reason why good fiberglass boat go to waste or become dangerous.
Before you get started make sure you take a few pictures.
The next job is to make a pattern of the inside of the transom so the new plywood can be cut to shape.
Once cured wash the repair with water to remove amine blush and grind or sand the fiberglass smooth.
Installing the new core.
Step 4 mark and cut the damaged area.
Cutting away the fiberglass and removing the.
Take measurements of all the parts around the transom.
Step 3 remove the transom.
After you have removed all the wires blowers.
Repairing the transom step 1 dry the boat.
Remove the material you have used to attach the fiberglass cloth to the boat before the bond coat sets up completely.
Gain access to transom skin and core.
Even if the thought of trying to fix a transom issue fills you with dread youll always do better if you spot an issue sooner rather than later.
Step 2 check the damage.
Step 5 cut the new transom.
This coat is known as the fill coat.
Step 8 install the new transom.
No comments:
Post a Comment