How To Repair Wood Floor Damage

Monday, June 2, 2014

How To Repair Wood Floor Damage

How to patch a hardwood floor replacing hardwood floors. Use a plastic putty knife to fill the scratch with wood filler that matches the color of the floor.

Hardwood Floor Repair Raleigh Nc Salpeck S Furniture Service

Patching Hardwood Floors

Hardwood Floor Repair Hardwood Floor Repair After Water Damage

Removing water stains if your hardwood floor dries with a white hazy film on the surface you might get rid of it using a soft cotton cloth and a very mild abrasive such as tooth paste polishing compound or even tobacco ashes mixed with mineral oil.

How to repair wood floor damage.

Follow these steps to safely make the plunge cuts you need to repair your hardwood floors.
Fix hardwood gouges and dents.
Then use a circular saw to connect the two holes photo 2.

Saw relief cuts into the flooring plank.
Doing so makes removal easier.
Hole through both ends of each damaged board photo 1.

Mark the floor board plank and drill holes.
Rub mineral spirits over the sanded area.
You can sometimes raise small dents by placing a.

Adjust the depth of cut to the thickness of the floorboards.
Remove damaged pieces of flooring.
How to repair a hardwood floor repair hardwood floor water damage.

Use a 12 or 38 inch diameter spade bit and power drill to drill holes along the marks.
Ideally we repair loose wood flooring by screwing up or nailing up from beneath the floor through the subflooring or best on an angle through the floor joists through the subfloor if present and into the bottom of the finish flooring above.
Make relief cuts in the flooring plank using.

Put vapor barrier in place.
Fill the scratch with premixed wood filler.
Over the years many hardwood floors develop small splits or cracks in the surface of the wood.

Pry out the damaged board.
Rub mineral spirits over the area to smooth it out and to pick up the fine dust from the sanding.
If the damage to your hardwood floor goes beyond a simple scratch and moves into the category of a gouge then youll need some type of filler to repair the nick before sanding staining and.

Repair hardwood floor scratches.
Split or cracked wood.
The easiest way is to bore a 1 in dia.

Minor scratches in wood floors often can be buffed away using steel.
Nail boards into place.
Let the filler dry thoroughly.

How to repair hardwood flooring step 1.
In general water is an enemy to wood floors.
Use a wood chisel to split the damaged board into two pieces.

These can be spot repaired with some angled nails to secure the two pieces together along with some wood putty to hide the blemishes.
Plug in the saw and put on eye protection.
Remove the bottom of the groove from the new floor plank.

If youre removing the entire strip skip this step.
If you have access to the floor from below applying heat from underneath will also help dry both the sub floor and the hardwood.